Item #: AS12 / AS16 / AS20 / AS24 / AS28 / AS32 / AS40 / AS48 / AS64
For cold weather working environments down to -40°C/-40°F
Material Data: Grade 8260
Note: Rated capacity is for 0º vertical pulls. Stamped with the letter "A" to identify them as low temperature specific. Proof tested in accordance with ASTM F 541 and Federal Spec. ANSI B18.15.
Safety Warnings:
- Rated capacity limit is drastically reduced when loading at any angle.
- Loading must never be made at an angle greater than 45 degrees from bolt centerline.
- At an angle up to 45 degrees rated capacity is reduced to of the tabulated value.
- Direction of Pull Rated Capacity: 0 degrees 100% of rated capacity, 1 - 15 degrees 80% of rated capacity, 16 - 30 degrees 65% of rated capacity, 31 - 45 degrees 30% of rated capacity, 46+ degrees is not recommended.
- Never apply loads greater than Rated Capacity to any eyebolt.
- Always use a shoulder eye bolt when performing angular lifts. Angular lifting using plain pattern eye bolts is not recommended.
- Traceability and Mechanical test values are available with each shipment upon request.
| Part No. |
Thread Size |
Shank Length (inches) |
I.D. Eye |
O.D. Eye |
Overall Length (inches) |
Center Of Eye To Shoulder |
Net Weight (lbs) |
Rated Capacity (lbs) |
| AS12 |
3/8-16 |
1¼ |
1.00 |
1-21/32 |
3.28 |
1.13 |
0.18 |
1,480 |
| AS16 |
½-13 |
1½ |
1-3/16 |
2-1/16 |
4.00 |
1.38 |
0.35 |
2,700 |
| AS20 |
5/8-11 |
1¾ |
1-3/8 |
2½ |
4.75 |
1.66 |
0.70 |
4,300 |
| AS24 |
¾-10 |
2.00 |
1½ |
2-13/16 |
5.28 |
1.82 |
1.10 |
6,400 |
| AS28 |
7/8-9 |
2¼ |
1-11/16 |
3¼ |
5.97 |
2.13 |
1.70 |
8,800 |
| AS32 |
1-8 |
2½ |
1-13/16 |
3-9/16 |
6.66 |
2.32 |
2.36 |
11,600 |
| AS40 |
1¼-7 |
3.00 |
2-3/16 |
4-7/16 |
8.22 |
2.94 |
4.68 |
18,400 |
| AS48 |
1½-6 |
3½ |
2½ |
5-3/16 |
9.47 |
3.32 |
7.77 |
26,600 |
| AS64 |
2-4½ |
4.00 |
3¼ |
6-7/8 |
11.88 |
4.38 |
16.70 |
47,600 |
