Item #: PR88-100ML / PR88-1L
SAFETY DATA SHEET
pr88 It's a water soluble skin protection cream, which is applied before work begins.
pr88 provides a non-greasy, non-sticky barrier against alcohol and carbon based substances like gasoline, diesel, oils, hydraulic fluids, creosote, fats, paint + thinners, tar, dyes resins, non-polar organic solvents, fiberglass, superglues, ink, graphite., epoxies, etc. Absorption of solvents and toxins by the skin is delayed and often prevented.
pr88 will not wipe off the skin nor transfer to surfaces touched once it has properly set on the skin (after approx. 1 minute) and therefore not contaminate work pieces.
pr88 is non-toxic, hypoallergenic, 85% biodegradable, dermatologically tested and found to be safe for over 25 years as a serious health and safety product.
BENEFITS
Consistent use of pr88 in the workplace for more than 25 years has shown dramatic reductions in time required for workers' clean up (up to 90%). Since pr88 comes off the skin instantly with either cold or warm water, reductions in water usage of up to 95% have been recorded with corresponding reductions in waste water (an important factor where radioactive or toxic sewage must undergo further expensive treatment!).
The product cost of pr88 represents approx. 25% of conventionally used skin cleaning products, mainly because only fixed amounts of cream can be comfortably applied. On the other hand up to 80% of detergents and soaps get into the sewers unnecessarily because of overuse.
1. Rubbing In
Before you start working, rub hands with a hazelnut-sized quantity pr88, not forgetting nails and nail beds. Also apply under fingernails.
2. At Work
Only take as much pr88 that the protective film will be dry after approx. 1 minute. Now the skin is protected against contact with the a.m. substances.
3. Washing Off
After work, wash hands with a little amount of water, the dirt is washed off together with pr88.
